🧦 How to Make Knitted Slippers with Two Colors – Step-by-Step Guide

Let’s knit some wonderfully cozy and stylish two-color knitted slippers! These are perfect for keeping your feet warm and adding a touch of handmade comfort to your home. Using two colors allows for endless creative combinations, making each pair unique.

How to Make Knitted Slippers with Two Colors: A Detailed Tutorial

This pattern will guide you through creating a comfortable and well-fitting pair of knitted slippers. You’ll knit the slipper flat in sections and then seam them together. The two-color design adds visual interest and a bit of a challenge, perfect for knitters looking to expand their skills.

Skill Level: Easy to Intermediate

You’ll need to be comfortable with:

• Casting On (CO): Starting your knitting project.
• Knit stitch (k): The basic knit stitch.
• Purl stitch (p): The basic purl stitch.
• Knit 2 Together (k2tog): A basic decrease, used for shaping.
• Purl 2 Together (p2tog): A basic decrease, used for shaping.
• Working in rows: Knitting back and forth.
• Binding Off (BO): Finishing your knitting.
• Changing colors: Seamlessly integrating your two chosen yarns.
• Seaming: Joining knitted pieces together (we’ll use mattress stitch).

Finished Slipper Dimensions (Approximate):

This pattern is written for an Adult Medium (US Women’s 7-9, US Men’s 6-8). You can adjust the size by changing your needle size or the number of rows knitted in certain sections.

• Sole Length: Approx. 9-10 inches (23-25 cm)
• Slipper Height: Approx. 3-4 inches (7.5-10 cm) at the ankle

Materials You’ll Need:

• Yarn: Approximately 150-200 yards (137-183 meters) of Worsted Weight (Medium #4) Yarn total.
  • Color A (Main Color): Approx. 100-120 yards (e.g., sole, back, and part of the top).
  • Color B (Accent Color): Approx. 50-80 yards (e.g., toe, cuff, or contrasting stripes).
  • Recommended: A soft yet durable acrylic yarn or a wool blend. These yarns offer warmth, good stretch, and are generally easy to care for. Avoid 100% cotton as it might not be as warm or stretchy enough for slippers.
• Knitting Needles: US Size 8 (5.0mm), or the needle size that helps you achieve the correct gauge. You’ll need straight needles or a circular needle long enough to comfortably hold your stitches while working flat.
• Yarn Needle (Tapestry Needle): Essential for seamlessly weaving in all your loose ends and for seaming your slipper pieces together.
• Scissors: For cutting your yarn.
• Stitch Markers (Optional but Recommended): A few stitch markers can be helpful for marking the center stitches during shaping.

Gauge (Important for Sizing!):

Getting your gauge right is crucial to ensure your slippers fit properly. A consistent gauge means your slippers will be the correct size and won’t stretch out too much.

• In stockinette stitch (knit on right side, purl on wrong side): Aim for 18 stitches and 24 rows = 4 inches (10 cm).
• How to check your gauge:
  1. Cast on 20 stitches.
  2. Work in stockinette stitch for about 30 rows (knit one row, purl one row).
  3. Bind off.
  4. Measure a 4×4 inch square in the middle of your swatch, avoiding the edges. Count your stitches and rows. If you have more than 18 stitches or 24 rows, try a larger needle size. If you have fewer, try a smaller needle size. Adjust until your swatch matches the gauge.

Abbreviations Used in This Pattern:

• CO: Cast On
• k: knit
• p: purl
• k2tog: knit 2 stitches together (a right-leaning decrease)
• p2tog: purl 2 stitches together (a decrease)
• st(s): stitch(es)
• RS: Right Side of work
• WS: Wrong Side of work
• FO: Fasten Off
• (): repeat instructions within parentheses a specified number of times.
• []: indicates the total number of stitches you should have at the end of a specific row.

Let’s Knit Your Two-Color Slippers!

You’ll knit this slipper in three main sections: the sole, the toe, and the top/cuff. Then, you’ll seam them together.

Part 1: The Slipper Sole (Color A)

We’ll start by knitting the bottom of the slipper. This section is worked flat.

1. CO 10 stitches using Color A.
   • Sizing Note: For a smaller slipper, cast on 8 stitches. For a larger slipper, cast on 12 stitches. This initial cast-on determines the width of your slipper’s sole.
2. Row 1 (RS): Knit all stitches. [10 sts]
3. Row 2 (WS): Purl all stitches. [10 sts]
4. Increase Section:
   • Row 3 (RS): K1, M1 (make 1 stitch by picking up the bar between stitches and knitting into it), knit to last stitch, M1, K1. [12 sts]
   • Row 4 (WS): Purl all stitches.
   • Row 5 (RS): K1, M1, knit to last stitch, M1, K1. [14 sts]
   • Row 6 (WS): Purl all stitches.
   • Row 7 (RS): K1, M1, knit to last stitch, M1, K1. [16 sts]
   • Row 8 (WS): Purl all stitches.
   • You should now have 16 stitches on your needle. This wider section forms the ball of your foot.
5. Straight Section:
   • Work in Stockinette Stitch (knit all stitches on RS rows, purl all stitches on WS rows) for approximately 4-5 inches (10-12.5 cm). This section forms the middle of your sole. Count your rows; for an adult medium, this is usually about 20-24 rows.
   • Try to measure against your foot (from the ball to just before the heel) to get a good length.
6. Decrease Section (Heel):
   • Next Row (RS): K1, k2tog, knit to last 3 stitches, k2tog, K1. [14 sts]
   • Next Row (WS): Purl all stitches.
   • Repeat these 2 rows 3 more times.[8 sts]
     • This creates a gentle taper for the heel.
7. Final Heel Rows:
   • Work in Stockinette Stitch for 2 more rows. [8 sts]
8. Bind Off all 8 stitches.
   • Do NOT cut yarn yet if you plan to use this tail for seaming the back of the slipper. Leave a tail about 15-20 inches long.

Part 2: The Toe (Color B)

This section will form the tip of your slipper and will be knitted separately using your accent color.

1. CO 10 stitches using Color B.
2. Row 1 (RS): Knit all stitches. [10 sts]
3. Row 2 (WS): Purl all stitches. [10 sts]
4. Increase Section:
   • Row 3 (RS): K1, M1, knit to last stitch, M1, K1. [12 sts]
   • Row 4 (WS): Purl all stitches.
   • Row 5 (RS): K1, M1, knit to last stitch, M1, K1. [14 sts]
   • Row 6 (WS): Purl all stitches.
   • Row 7 (RS): K1, M1, knit to last stitch, M1, K1. [16 sts]
   • Row 8 (WS): Purl all stitches.
   • You should now have 16 stitches on your needle.
5. Straight Section:
   • Work in Stockinette Stitch for approximately 2 inches (5 cm). This usually means about 8-10 rows.
   • Bind Off all 16 stitches.
   • Cut yarn, leaving a tail about 15 inches long for seaming.

Part 3: The Slipper Top/Instep (Color B or A)

This section covers the top of your foot. You can use Color B to match the toe, or Color A for contrast.

1. CO 12 stitches using Color B (or your chosen color).
2. Ribbing (Optional but Recommended for a snug fit):
   • Row 1 (RS): (K1, P1) across to end.
   • Row 2 (WS): (P1, K1) across to end.
   • Repeat these 2 rows for approximately 1 inch (2.5 cm) of ribbing (4-6 rows).
3. Straight Section:
   • Change to Stockinette Stitch (if you did ribbing).
   • Work in Stockinette Stitch for approximately 2-3 inches (5-7.5 cm). This will be about 10-15 rows.
   • Bind Off all 12 stitches.
   • Cut yarn, leaving a tail about 15 inches long for seaming.

Part 4: Assembling Your Two-Color Slippers

This is where all your knitted pieces come together! We’ll use the Mattress Stitch for an invisible seam.

1. Sole to Toe Seam:
   • Lay your Sole piece (Color A) and your Toe piece (Color B) flat, with the right sides facing up.
   • Align the bound-off edge of the Toe piece with the wider (increased) end of the Sole piece.
   • Using the long tail from your Toe piece and your yarn needle, carefully seam the two pieces together.
   • Mattress Stitch Tip: Insert your needle under the horizontal bar between the first and second stitch on one side, then across to the other piece, picking up a bar from the corresponding stitch. Continue alternating sides, pulling the seam gently tight as you go to make it invisible.
2. Top/Instep Seam:
   • Align the bound-off edge of your Top/Instep piece (Color B or A) with the bound-off edge of your Toe piece. Seam these together using the mattress stitch. This creates the upper part of the slipper.
3. Side Seams (Toe/Instep to Sole):
   • Now, you’ll seam the sides of your combined toe/instep piece to the edges of your sole. Start from the front (toe) and work your way back.
   • Match up the rows and stitches as best as you can, using the mattress stitch. This creates the sides of the slipper.
4. Back Heel Seam:
   • Fold the sole piece in half lengthwise, bringing the two short sides of the heel together.
   • Using the long tail from the sole piece (Color A), seam the back of the heel together using the mattress stitch. This forms the closed heel of the slipper.
5. Ankle Opening Seam:
   • The remaining open edges will form the ankle opening of your slipper. You may need to seam the last few rows of the top/instep piece to the sides of the sole.

Part 5: Finishing Your Slippers

1. Weave in All Ends:
   • This is the final, crucial step for a neat, comfortable, and durable slipper. Thread any remaining loose yarn tails onto your yarn needle.
   • Carefully weave them into the stitches on the inside of your slipper, making sure they are well hidden and secure. Weave in one direction for a few stitches, then change direction slightly and weave back through a few more stitches to “lock” the tail in place and prevent it from unraveling.
   • Take your time with this to ensure your slippers look professional and will last.
2. Make the Second Slipper:
   • Repeat all steps from Part 1 through Part 4 to create your second slipper. It’s important to maintain consistent tension and follow the pattern precisely for both slippers so they are a matching pair!
3. Optional: Add a Non-Slip Sole (Highly Recommended for Safety!):
   • To prevent slipping on smooth floors (like wood or tile), you can apply liquid latex or “puffy paint” (fabric paint designed for traction) to the bottom of the soles.
   • Turn your slippers right side out and gently try them on to stretch them to their final shape. Take them off.
   • On the outside bottom of the sole, apply dots, lines, or a pattern of the non-slip product. Follow the product’s instructions for drying time. You might need multiple coats for good grip.

You’ve now created a beautiful and wonderfully comfortable pair of two-color knitted slippers! Enjoy lounging in your handmade creations. They also make fantastic, heartfelt gifts. What color combination will you try for your next pair?

Tutorial Video